Sequential Take 5 Review: The Most Underrated Synth Right Now?

The Sequential Take 5 might be the most underrated synth around right now. When I first tried it, in a store and at Superbooth, the factory presets didn't grab me. It only clicked once I started making my own sounds, and now it's a synth I'd happily keep.

In this post I go through the whole instrument the same way I do in the video: the oscillators, filter, envelopes, effects, the vintage knob, modulation and the back panel.

Not sponsored. Sequential lent me the Take 5 for this review. All opinions are my own.

Watch the full review on YouTube: [YouTube link]

The Take 5 at a glance

A five-voice analog poly with the Prophet-5 sound in a compact, 44-key package.

  • Voices: 5, analog VCO/VCF

  • Oscillators: 2 analog VCOs per voice, wave shape from sine to saw to variable-width pulse, sub-octave on osc 1, hard sync, FM

  • Filter: 4-pole resonant low-pass, based on the Prophet-5 Rev 4

  • Envelopes: 2, each ADSR plus delay, routable to filter, amp or auxiliary

  • LFOs: 2, one global and one per voice

  • Effects: reverb, a multi-effect and a dedicated overdrive

  • Performance: arpeggiator, polyphonic step sequencer (up to 64 steps), vintage knob, unison

  • Keyboard: 44 semi-weighted Fatar keys, velocity and aftertouch, low split

  • Power: internal power supply, standard IEC cable

The factory presets: the weak point

In my opinion, the presets are the biggest reason the Take 5 is underrated. Most people decide on a synth by flicking through presets in a store or at a trade fair, and these never blew me away.

You do hear that big, brassy sound the Prophets are famous for straight away, and some presets will suit certain styles. But most of them don't show what this synth can really do.

Worth knowing: Sequential's free OS 2.0 update added 128 new patches from sound designers, so the current bank may land differently than what I heard in the store.

Making my own sounds: where it clicked

Everything changed when I started from scratch. Turn the Preset button off and the sound follows the panel exactly: what you see is what you hear. That makes it a great synth to learn on.

Within a short time I had a set of sounds I actually wanted to play:

  • A mellow, space-filling pad

  • An 80s-style arp

  • An organ-ish patch

  • A bass with a nice glide

The low split helps a lot here. It drops the lower part of the keyboard by one or two octaves, so the 44 keys give you a much wider range than you'd expect. I actually like the smaller keyboard: with the lowest note on an F, chords fall under my hands more easily.

Oscillators: the sine wave trick

The Take 5's shape knob starts at a pure sine wave, and that's my favourite thing about it. On most analog synths the first shape is a triangle. Turn the knob further and it morphs into sawtooth, then pulse, and you can narrow the pulse until it almost disappears.

I just love sine waves. They have this soft, ringing sound that fits the music I make. If you know other polyphonic analog synths that start on a sine, let me know in the comments.

A few other details I liked:

  • Pitch knob with a centre detent. You can feel where "in tune" is, even on a dark stage.

  • Sub octave. Adds a square wave one octave below oscillator 1.

  • FM. Oscillator 2 can frequency-modulate oscillator 1. I'm not a big FM fan myself, but it's there.

Mixer, filter and envelopes

Mixer. You blend oscillator 1, its sub octave and oscillator 2, plus white or pink noise.

Filter. The filter is the heart of the Take 5's sound: a 4-pole resonant low-pass based on the Prophet-5 Rev 4. I really appreciate the big cutoff knob. It's easy to find, and easy to find the sweet spot with.

  • Resonance behaves differently from older Prophets. Turn it up and it gets whistly, but the low end stays in the sound, so notes keep their weight.

  • Drive is subtle. Honestly, I found it hard to hear what it does.

Envelopes. There are two, with attack, decay, sustain, release and amount, plus a delay stage tucked away in the Program menu. You can also use envelope 1 as an auxiliary envelope and route it to almost anything. Both envelope amounts can respond to velocity, so playing soft or hard really changes the sound.

Effects, arpeggiator and step sequencer

Effects. There's a master reverb plus a multi-effect. The delay has its own high- and low-pass filters, which I love: I almost always roll off a bit of the high end on delays. The multi-effect covers:

  • Delay, bucket brigade delay and tape delay (two versions, one more saturated)

  • Chorus, flanger and phaser

  • High-pass filter and distortion

  • Ring modulation and rotary speaker, for your organ parts

  • Lo-fi, for some extra wobble and noise

Most of the time I stick to tape delay.

Arpeggiator. Modes are up, down, up/down, random and assign, over one, two or three octaves. You can also set repeats, so each note plays more than once before the arp moves on.

Step sequencer. It's polyphonic and goes up to 64 steps, with tap tempo, clock divide and BPM next to it. What would a synth be without one these days?

Vintage knob, unison and the overdrive

Vintage knob. This one I really love. Turn it up and every note changes a little in its tuning and character, voice by voice. I wouldn't call it unpredictable or out of tune. It just gives you the warmth and life of playing an old analog synth.

Unison and glide. Unison stacks up to all five voices on one note, and the glide does exactly what you'd expect.

Overdrive. Here's what surprised me most. Even with the overdrive full on, the Take 5 stays polite. Other synths shout "here I am" in your face. This one gets growly, adds a bit of dirt, and still fills the room without fighting to be in front. It's politely growling, and it leaves space for everything else in the mix.

Modulation: LFOs and the mod matrix

The Take 5 goes deeper on modulation than you'd expect from a compact synth.

Two LFOs. LFO 1 is global, so it runs the same for every note. LFO 2 is per voice, so it reacts to every note you play. Shapes are triangle, sawtooth, reverse sawtooth, square and random (sample and hold), and both can sync to the clock.

Mod matrix. Sequential lists 19 sources and 54 destinations. Assigning is quick: pick a source, pick a destination, set the amount. Some routings I tried:

  • Pressure to cutoff, so aftertouch opens the filter

  • Voice spread to pan, so every note lands in a different spot in the stereo field

  • Sample and hold to pitch, for random movement (not the most musical result, but it works)

Back panel and the internal power supply

On the back you'll find a headphone output, stereo outputs, inputs for a sustain pedal and an expression pedal, MIDI in, out and thru, and USB.

It sounds like a small thing, but my favourite detail is the internal power supply with a standard IEC power cable. Forget your power supply at a gig, and the sound engineer almost always has a spare cable you can borrow. Touring musicians will love that.

Verdict

The Take 5 is a really complete synth, and I fell in love with it once I stopped using the presets and started making my own sounds. The sine-wave oscillators especially help me make the music I want to make with an analog synth.

Who it's for:

  • Mellow, piano-like sounds for lo-fi and ambient

  • Full-on 80s brass and classics

  • Cinematic, Blade Runner-ish soundscapes, especially with the effects

What I love

What could be better

Oscillators that start at a sine wave

The factory presets undersell it

An overdrive that stays polite

The filter drive is very subtle

The vintage knob

Deep modulation for a compact synth

Internal power supply

What do you think of the Take 5? Have you tried it, do you own one, or is it not for you? Tell me in the comments under the video.

Support the channel

  • Want one? Buying through [affiliate link] helps me make more reviews, at no extra cost to you.

  • Like the review but the synth isn't for you? A Super Thanks on YouTube or one of [my guides] helps too.

Sources

Next
Next

Universal Audio Volt 2 Gen 2 & Volt 4 Max review: recording with character, straight from the interface